Click Here

 

 

Are you interested in related information concerning How to Troubleshoot and Repair an Electric Water Heater?

Many contemporary houses take advantage of an electric hot water heater for their furnace, due to its benefit and also convenience of use. However, much like any other electric devices, problems may develop with its use, all of a sudden. It can be actually frustrating to wake up to a cold shower instead of a hot one or having your bath with water that isn't hot sufficient and even too hot. Whatever the situation may be, water heater issues can be rather stressful. Luckily, we have actually made a listing of feasible remedies to your hot water heater concerns. There are a number of elements that might trigger a number of these issues, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you switch off the major power supply for safety and security. Whatever the trouble is, getting it taken care of must not present excessive of a problem if you follow these steps:

 

Call A Specialist:

If after changing all defective parts and also resetting your temperature level, the water heater still isn't working, you might need to contact a specialist plumber for an expert viewpoint. The problem with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, an expert plumber would certainly assist resolve the problem.

 

Examine Your Power Supply:

As fundamental as this may appear, it is really required. Without sufficient power, your hot water heater will certainly not work. So the first thing to do when your water suddenly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, simply transform it off and on again. Change any type of broken or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's now functioning.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to check the temperature level settings on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open up the gain access to panel and press the red switch for temperature reset above the thermostat. This need to assist heat the water. Transform the circuit breaker back on and examine if the issue has actually been dealt with.

 

Examine the Burner in the Water Heater:

If it's not a power trouble, then try looking into your heating element if it is still working. Check each of your heating elements to ensure the issue isn't with any of them. If any of them is damaged, replace that part and afterwards inspect whether the warm water is back on.

 

Verdict

Water heater problems are not constantly major. Much of them result from minor issues like a blown fuse or worn-out heating element. Changing the faulty components should work. However, if you are still not able to solve the issue, give a call to your nearest plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you appreciate reading up on What Would Cause My Electric Water Heater to Stop Working?? Write feedback down below. We will be interested to see your reactions about this write up. We hope to see you back again in the near future. Don't hesitate to take the time to distribute this content if you enjoyed reading it. Thank-you for your time spent reading it.

Apply Now